Tenacity™ No. 6 contains an addition of elemental boron which improves filler metal wetting on refractory metals and difficult to wet materials such as tungsten carbide and PCD.
Variants, such as Tenacity™ No. 125 are also available which are suitable for bronze welding and components requiring extended heating cycles, low silver or copper-based brazing filler metals.
Tenacity™ No. 6 Flux Powder EN1045
FH12
Working Range
550 - 800°C
Tenacity™ No.6 Flux Powder is a brown boron modified flux for use on tungsten carbide and materials containing refractory metals. It has superior fluxing activity to many other products of its type.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron.
Other
MSRR9500/127
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron.
Other
MSRR9500/127
Tenacity™ No. 6 Flux Paste EN1045
FH12
Working Range
550 - 800°C
Tenacity™ No.6 Flux Powder is a brown boron modified flux for use on tungsten carbide and materials containing refractory metals. It has superior fluxing activity to many other products of its type.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron. Other
MSRR9500/127
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron. Other
MSRR9500/127
Tenacity™ No. 5A Flux Powder EN1045
FH12
Working Range
600 - 900°C
Tenacity™ No.5A Flux Powder is designed for use on stainless steel, tungsten carbide and materials containing refractory metals in instances where there is a need for a higher temperature flux with improved wetting.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and refractory metals.
Tenacity™ No. 5A Flux Powder has good ‘temperature-time stability' and overheat resistance.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and refractory metals.
Tenacity™ No. 5A Flux Powder has good ‘temperature-time stability' and overheat resistance.
Tenacity™ No. 3A Flux Paste -
-
Working Range
600 - 875°C
Tenacity™ No.3A Flux Paste is a non-standard boron modified flux for use on stainless steel, tungsten carbide and materials containing refractory metals.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron.
It is recommended for improving wetting of the filler metal on cemented tungsten carbide.
It is also used for tungsten carbide backed PCD and for grades of cast iron.
Tenacity™ No. 4A Flux Powder EN1045
FH10
Working Range
600 - 850°C
Tenacity™ No.4A Flux Powder is a medium temperature flux intended for use with lower silver content brazing filler metals or where a higher working range flux is needed.
It is recommended for silver brazing where a higher working range flux is needed such as with lower silver content filler metals. Tenacity™ No. 4A Flux Powder is also used for brazing large copper alloy components and phosphorus containing filler metals.Other
MSRR9500/130
It is recommended for silver brazing where a higher working range flux is needed such as with lower silver content filler metals. Tenacity™ No. 4A Flux Powder is also used for brazing large copper alloy components and phosphorus containing filler metals.Other
MSRR9500/130
Tenacity™ No. 5 Flux Powder EN1045
FH10
Working Range
600 - 900°C
Tenacity™ No. 5 Flux Powder is a high temperature silver brazing flux with a long life and wide working range. It is restrictive when molten and forms insoluble glass-like residues.
It is recommended for prolonged heating operations and large assemblies in steel or copper.
Tenacity™ No. 5 Flux Powder is also used on stainless steel above 700˚C and for controlling filler metal spread.Other
MSRR9500/126
It is recommended for prolonged heating operations and large assemblies in steel or copper.
Tenacity™ No. 5 Flux Powder is also used on stainless steel above 700˚C and for controlling filler metal spread.Other
MSRR9500/126
Tenacity™ No. 20 Flux Powder EN1045
FH21
Working Range
750 - 1000°C
Tenacity™ No.20 Flux Powder is a high temperature flux designed for bronze welding/braze welding/brazing with ArgentelTM brass type filler metals.
It is recommended for bronze or braze welding operations and copper, mild and low alloy steels.
Tenacity™ No.20 Flux Powder is used with copper-based filler metals.
It is recommended for bronze or braze welding operations and copper, mild and low alloy steels.
Tenacity™ No.20 Flux Powder is used with copper-based filler metals.
Tenacity™ No. 125 Flux Powder EN1045
FH21
Working Range
750 - 1200°C
Tenacity™ No.125 Flux Powder is a high temperature flux powder suitable for use with Argentel™ and JM Bronze™ filler metals.
It is used on mild and low alloy steels and tungsten carbide.
It is also recommended to use it with copper-based brazing filler metals and JM Bronze™ filler metals such as F Bronze™.
It is used on mild and low alloy steels and tungsten carbide.
It is also recommended to use it with copper-based brazing filler metals and JM Bronze™ filler metals such as F Bronze™.
Tenacity™ No. 125 Flux Paste EN1045
FH21
Working Range
750 - 1200°C
Tenacity™ No.125 Flux Paste is a high temperature flux paste suitable for use with Argentel™ and JM Bronze™ filler metals.
It is used on mild and low alloy steels and tungsten carbide.
It is recommended to use with copper-based brazing filler metals and JM Bronze™ filler metals such as F Bronze™.
It is used on mild and low alloy steels and tungsten carbide.
It is recommended to use with copper-based brazing filler metals and JM Bronze™ filler metals such as F Bronze™.
Tenacity™ No. 2 Modified Flux Powder EN1045
FH10
Working Range
550 - 800°C
Tenacity™ No. 2 Modified Flux Powder is formulated for use as a flux for coating silver brazing rods. It is a specially milled white flux powder which is active early in its working range.
Tenacity™ No. 14 Flux Powder EN1045
FH10
Working Range
550 - 750°C
Tenacity™ No. 14 Flux Powder is a specialised silver brazing flux used on brass where red staining due to oxidation of zinc is a problem.
It is recommended for brass where red staining is a problem and low temperature hand torch brazing operations.
Tenacity™ No. 14 Flux Powder is being active early in its working range.
It is recommended for brass where red staining is a problem and low temperature hand torch brazing operations.
Tenacity™ No. 14 Flux Powder is being active early in its working range.